Weigh
The bale crosses the platform after leaving the chamber and is measured multiple times.
From bale to cab
One continuous feedback loop.
The weighing platform, controller, control valve and compatible tractor terminal work together to keep the operator informed and respond to changing crop conditions.
Calculate
The controller processes each bale and maintains the selected average.
Compare
The measured result is compared with the target chosen by the operator.
Adjust
Weighay changes hydraulic pressure through its control valve when automatic control is selected.
Display
Live system information remains visible on the tractor terminal.
Operator information
The key baling figures in one place.
Weight and pressure
View the selected target, average weight and system hydraulic pressure while working.
Counts and output
Monitor bale count, flakes per bale, bales per hour, kilograms per hour and operating hours.
Diagnostics
On-board diagnostic information and component alarms support troubleshooting in the field.
Before ordering
Confirm the terminal and connection.
ISOBUS capability varies between tractors and displays. The exact cab connection and available screen arrangement should be checked for the intended tractor.
- A compatible tractor ISOBUS terminal
- An appropriate cab or external ISOBUS connection
- A suitable weighing-platform mounting position
- The correct harness and hydraulic installation for the baler
- Calibration and regular sample-bale checks
The Weighay FAQ references an in-cab nine-pin auxiliary cable, part number 22916-01, when the external ISOBUS socket is already in use. Confirm suitability before ordering.
Check your tractor
Discuss my ISOBUS setup
Already have an ISOBUS display?
Send Weighay the tractor, terminal and baler details so the complete connection and installation can be confirmed.
